Features
1.Dual digital display (PV/SV)
2.100ms high-speed sampling rate and ±5% display accuracy
3.Switch between relay output and SSR drive output
4.SSR drive output (SSRP function) control options : ON/OFF control, cycle control, phase control
5.Compact design with large display panels for easier reading
Ordering information
* In case of the AC voltage model, SSR drive output method (standardON/OFF control, cycle control, phase control) is available to select.
Specifications
|
Series |
TCN4S |
TCN4M |
TCN4H |
TCN4L |
|
|
Power supply |
AC power |
100-240VAC~50/60Hz |
|||
|
AC/DC power |
24VAC~50/60Hz, 24-48VDC |
||||
|
Allowable voltage range |
|
90 to 110% of rated voltage |
|||
|
Power consumption |
AC power |
Max.5VA(100-240VAC 50/60Hz) |
|||
|
AC/DC power |
Max.5VA (24VAC 50/60Hz),max. 3W(24-48VDC) |
||||
|
Display method |
|
7-segment (PV: red,SV: green). Other display (green, red) LED |
|||
|
Character size |
PV (WxH) |
7.0x15.0mm |
9.5x20.0mm |
7.0x14.6mm |
11.0x22.0mm |
|
SV (WxH) |
5.0x9.5mm |
7.5x15.0mm |
6.0x12.0mm |
7.0x14.0mm |
|
|
Input type |
RTD |
DPt100Ω,Cu50Ω(allowable line resistance max. 5Ω per a wire) |
|||
|
Thermocouple |
K(CA),J(IC),L(IC),T(CC),R(PR),S(PR) |
||||
|
Display accuracy*1 |
RTD |
•At room temperature(23℃±5℃): (PV ±0.5% or ±1℃, select the higher one)±1-digit |
|||
|
Thermocouple |
|||||
|
Control output |
Relay |
250VAC~3A, 30VDC 3A,1a |
|||
|
SSR |
12VDC ±2V 20mA Max. |
||||
|
Alarm output |
AL1,AL2 Relay output:250VAC 1A 1a |
||||
|
Control method |
ON/OFF control,P,PI,PD,PID control |
||||
|
Hysteresis |
1 to 100°C/°F(0.1 to 50.0°C/°F) variable |
||||
|
Proportional band (P) |
0.1 to 999.9□/□ |
||||
|
Integral time (l) |
0 to 9999 sec |
||||
|
Derivative time(D) |
0 to 9999 sec |
||||
|
Control period (T) |
0.5 to 120.0 sec |
||||
|
Manual reset |
0.0 to 100.0% |
||||
|
Sampling period |
100ms |
||||
*1:©At room temperature (23℃ ±5℃)
●Thermocouple R (PR), S (PR), below 200℃: (PV ±0.5% or ±3℃, select the higher one) ±1-digit
●Thermocouple R (PR), S (PR), over 200℃: (PV ±0.5% or ±2℃, select the higher one) ±1-digit
●Thermocouple L (IC), RTD Cu50Ω: (PV ±0.5% or ±2°C, select the higher one)±1-digit
©Out of room temperature range
●Thermocouple R (PR), S (PR), below 200℃: (PV ±1.0% or ±6℃, select the higher one) ±1-digit
●Thermocouple R (PR), S (PR), over 200℃: (PV ±0.5% or ±5℃, select the higher one ±1-digit
●Thermocouple L (IC), RTD Cu50Ω: (PV ±0.5% or ±3C, select the higher one)±1-digit
For TCN4S-□-P, add ±1°C by accuracy 'standard.
|
Series |
TCN4S |
TCN4M |
TCN4H |
TCN4L |
|
|
Dielectric |
AC Power |
2,000VAC 50/60Hz for 1 min (between input terminal and power terminal) |
|||
|
AC/DC power |
1,000VAC 50/60Hz for 1 min (between input terminal and power terminal) |
||||
|
Vibration |
0.75mm amplitude at frequency of 5 to 55Hz in each X, Y, Z direction for 2 hours |
||||
|
Relay life |
Mechanical |
OUT: over 5,000,000 times, AL1/2: Over 5,000,000 times |
|||
|
Electrical |
OUT: over 200,000 times (250VAC 3A resistive load) |
||||
|
Insulation resistance |
Over 100MΩ(at 500VDC megger) |
||||
|
Noise immunity |
±2kV R-phase, S-phase the square wave noise (pulse width: 1us) by the noise simulator |
||||
|
Memory retention |
Approx. 10 years (when using non-volatile semiconductor memory type) |
||||
|
Environ-ment |
Ambient temperature |
-10 to 50℃, storage: -20 to 60℃ |
|||
|
Ambient humidity |
35 to 85%RH, storage: 35 to 85%RH |
||||
|
Insulation type |
Double insulation or reinforced insulation (mark: 回, dielectric strength between the measuring input part and the power part: AC power 2kV, AC/DC Power 1kV) |
||||
|
Approval |
CE |
||||
|
Weight*2 |
Approx. 147g |
Approx. 203g |
Approx. 194g |
Approx. 275g |
|
*2: The weight includes packaging. The weight in parenthesis is for unit only.
*Environment resistance is rated at no freezing or condensation.