China SSR-P Series PCB Type Solid State Module (SSR) Manufacturer, Factory

SPECIFICATIONS

INPUT	KSSR-P124口DA	KSSR-P122口DD
Control voltage range	3-32VDC
Max input current	6-35mA
Must turn-on voltage	3.5VDC
Must turn-off voltage	1.5VDC
OUTPUT
Load voltage	220VAC,380VAC	60VDC,110VDC,220VDC
Max load current	1A.2A.3A.4A.5A.6A.7A
Off-state leakage current	<1.5mA
On-state voltage drop	≦1.5V
GENERAL
Dielectric strength	2500V
Operating temperature	-20℃-70℃
Certificate	CE

OUTLINE DIMENSIONS

SSR-P Series PCB Type Solid State Module (SSR).jpg

PRECAUTIONS:

1.For relay welding, the welding time should not exceed 10 seconds at 260'c, not exceed 5 seconds at 350℃.

2.When wiring the relay, make sure that the polarity of the input terminal is correct, so as not to damage the relay.

3.The heat sink is built-in, if the heat dissipation regulation is poor.the output load current should be derated.

4.lf the transient voltage at both ends of the relay exceeds thenominal value,a varistor should be connected in parallel at the output end of the relay to prevent the relay from being broken dow.

1.SSR-P Series PCB Type Solid State Module (SSR).jpg 2.SSR-P Series PCB Type Solid State Module (SSR).jpg 3.SSR-P Series PCB Type Solid State Module (SSR).jpg 4.SSR-P Series PCB Type Solid State Module (SSR).jpg 5.SSR-P Series PCB Type Solid State Module (SSR).jpg