SPECIFICATIONS
INPUT
A) Thermocouple: K,J,E,T,R,S,B,U,L,N,PL2,W5Re/w26Re
B) RTD: Pt100
C) DC input: DC0-5V,DC1-5V,DC0-20mA*,DC4-20mA*
* Requires a 250Ω resistor connected to the input terminal
Input display accuracy: 0.3%±1 of the set value SV
Sampling Time: 0.5 sec
PV BIAS
-1999~9999℃ or -199.9~999.9℃(temperature input)
±full span(voltage/current input)
SETTING RANGE
A) Setting range: same as input range
B) Heat-side proportional band(P): 1 to span or 0.1 to span (ON/OFF action when P=0)
C) Cool-side proportional band(Pc): 0 to 1000% of heat-side proportional band (heat/cool ON/OFF action when Pc=0)
D) Integral time(I): 0 to 3600sec.(PD action when I=0)
E) Derivative time(D): 0 to 3600sec.(PI action when D=0)
F) Anti-reset windup(ARW): 1 to 100% of heat-side proportional band
G)Deadband/overlap: -10 to 10℃(°F ) or -10.0 to 10.0℃(°F)
H) Proportional cycle: 1 to 100 sec.
CONTROL METHOD
A) PID control with autotuning
*Available for reverse and direct action (Specify when ordering)
B) Heat/Cool PID control with autotuning (Specify when ordering)
*Available for air and water cooling type
CONTROL OUTPUT
A) Relay output: 250V AC 5A (resistive load)
B) Voltage pulse output: 0-12V DC (Load resistance: more than 600Ω)
C) Current output: 4-20mA/DC 0-20mA/DC (Load resistance: less than 600Ω)
0-10mA(Load resistance: 800Ω)
TEMPERATURE ALARM
A) Number of alarm: 2 points (Maximum)
B) Alarm action: Deviation High,Low,High/Low,Band Process High,Low
C) Alarm differential gap: 2℃(°F) or 2.0℃(°F) as standard.
ALARM OUTPUT
Relay output, Form A contact 250V AC 5A (resistive load)
WARRANTY
18 months
Specifications
| Models | Code | ||||||||
| CH102(48x48mm) CH402(48x96mm) CH702(72x72mm) F 口口口-口 口*口 口-口 口 CH902(96x96mm) CH502(96x48mm) CH802(160x80mm) |
|||||||||
| Control method | PID control with AT(reverse action) | F | |||||||
| Input type | See Range and Input Code Table | 口口口 | |||||||
| Control output (OUT1) |
Relay contact output Voltage pulse output DC current output 4-20mA Triac trigger output Triac output |
M V 8 G T |
|||||||
| Control output (OUT2) |
Relay contact output Voltage pulse output DC currentoutput 4-20mA Triac output |
M V 8 T |
|||||||
| Alarm | No alarm See Alarm Code Table |
N 口 |
|||||||
| Communication | No communication | N | |||||||
| IPXX | No waterproofand dustproof | N | |||||||
Note: No alarm function when OUT2 used for cooling
POWER SUPPLY
| Power Supply | |
| 100-240VAC | |
| 24VAC | |
| 24VDC |
ALARM CODE TABLE
| Code | Type |
| A | Deviation High |
| B | Deviation Low |
| C | Deviation High - Low |
| D | Deviation Band |
| E | Deviation High with Hold |
| F | Deviation Low with Hold |
| G | Deviation High/Low with Hold |
| H | Process High |
| J | Process Low |
| K | Process High with Hold |
| L | Process Low with Hold |
| R | Loop break alarm(LBA) |
| V | SV High alarm |
| W | SV Low alarm |
RANGE AND INPUT CODE TABLE
RTD
| Input | Code | Range | |
| PT100 | D | 01 | -199.9-649.0℃ |
| D | 02 | -199.9-200.0℃ | |
| D | 05 | -100.0-200.0℃ | |
| D | 08 | 0.0-200.0℃ | |
| D | 10 | 0.0-500.0℃ | |
VOLTAGE AND CURRENT
| Input | Code | Range | |
| DC0~5V | 4 | 01 | 0.0~100.0 |
| DC1~5V | 6 | 01 | 0.0~100.0 |
| DC0~20mA # | 7 | 01 | 0.0~100.0 |
| DC4~20mA # | 8 | 01 | 0.0~100.0 |
# A resistor of 250Ω must be connected between input terminals.
THERMOCOUPLE
| Input | Code | Range | |
| K | K | 01 | 0-200℃ |
| K | 02 | 0-400℃ | |
| K | 03 | 0-600℃ | |
| K | 04 | 0-800℃ | |
| K | 05 | 0-1000℃ | |
| K | 06 | 0-1200℃ | |
| K | 07 | 0-1372℃ | |
| J | J | 01 | 0-200℃ |
| J | 02 | 0-400℃ | |
| J | 03 | 0-600℃ | |
| J | 04 | 0-800℃ | |
| J | 05 | 0-1000℃ | |
| J | 06 | 0-1200℃ | |
| R¹ | R | 01 | 0-1600℃ |
| R | 02 | 0-1769℃ | |
| S¹ | S | 01 | 0-1600℃ |
| S | 02 | 0-1769℃ | |
| B¹ | B | 01 | 400-1800℃ |
| B | 02 | 0-1820℃ | |
| E | E | 04 | 0-800℃ |
| E | 02 | 0-1000℃ | |
| N | N | 01 | 0-1200℃ |
| N | 02 | 0-1300℃ | |
| T² | T | 01 | -1999-400℃ |
| T | 02 | -199.9-100℃ | |
| T | 03 | -100.0-200℃ | |
| T | 04 | 0.0-350℃ | |
| W5Re/W26Re PL II |
W | 01 | 0-2000℃ |
| W | 02 | 0-2320℃ | |
| A | 01 | 0-1300℃ | |
| A | 02 | 0-1390℃ | |
| A | 03 | 0-1200℃ | |
1.Type R,S,B input: Accuracy is not guaranteed between 0 and 399°C.
2.Type T input: Accuracy is not guaranteed between -199.9~+100.0°C.